Floating floor or solid timber floor?

Solid timber floors are an investment for the future with a lifespan of 30 to 50 years.  A floating floor is a good option when convenience is a predominant factor as they can be installed and walked on in the same day.

How long does it take to lay solid timber floors?

Because we have such a large team of timber floor specialists we can meet most time requirements, in most cases minimum of 2 weeks can be achieved.

When is the best time to install floorboards during a renovation?

It’s best to lay the timber floors straight after plaster and before cabinetry / kitchen installation. Sanding should be done after all the trades have finished. 

Do you provide a warranty?

We provide a manufacturers warranty and we only use recognised brands.  We also strictly adhere to manufacturer’s installation process.

Can I install the timber floor myself?

Yes, we provide a full range of hire tools for installation and sanding with unlimited expert advice.

What type of timber floor install system should I use?

Direct Stick or Ply System.  It is our recommendation when installing a narrow 85mm board the Direct Stick system is more common and reduces finished floor height.  The Ply System must be used for wide board installation (130mm and over) onto concrete subfloor.

What coating?  Water based or Solvent based?

For a high gloss, traditional finish solvent based polyurethane is recommended, for a clean, fresh, contemporary, non-yellow finish a water based solution works best. Speak with one of our consultants regarding your best needs.

What is the lifespan of the timber floor coating?
With our recommended commercial grade coating 8 to 10 years would be expected.

How much dust is created when during the sanding process?

As we use the latest equipment for dust prevention it is minimal.  We also vacuum between coats to assist this process.  Speak with our consultant about other preventative measures.

Can I lay a new timber floor over my existing wooden floorboards?

Certainly, almost all our timber flooring products would suit this kind of installation

How often will I need to sand and re-polishing my floors?

Providing regular maintenance is performed e.g. vacuuming, periodical “dry” mopping, the placement of door mats etc so things like sand and dirt being walked over the floor is prevented the coating system should last 7-10 years until it would require maintenance recoat. Just remember as long as you look after your floor, it will look after you.

Are solid wood floors noisier than floating floors?

To a certain degree, as the floating system are cushioned by an underlay.  It will also depend on what type of flooring system e.g. timber onto bearers/ joist or batons will almost always be a noisier floor than timber onto plywood (if a concrete substrate is present).